2021 Caterpillar Diesel Generator Sets 1501 - 2000 CM25E

Information

2021 Caterpillar Diesel Generator Sets 1501 - 2000 CM25E

Producing reliable power from 1940 to 2910 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM25E 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

POST-EMISSION TREATMENT SYSTEMS FOR LOWER EMISSION REQUIREMENTS AVAILABLE STAGE 1 AND 2 WORLD BANK (WB) EMISSION CERTIFICATION

Features may include:

  • Reliable Operation
  • Control & Monitoring
  • Ease Of Installation
  • Ease Of Operation
  • Intelligent Simplicity
  • Ease Of Maintenance
  • Fuel
  • Emissions
  • Expertise & Experience

Photos

Highlights

  • Red Deer, Alberta
  • 2021
  • Caterpillar
  • Diesel Generator Sets 1501 - 2000 CM25E
  • Diesel oil / heavy fuel oil (HFO) / crude oil
  • Available
  • Minimum: 2357 mm (93 in) | Maximum: 2357 mm (93 in)
  • Minimum: 3866 mm (152 in) | Maximum: 4066 mm (160 in)

Specifications

  • 2021
  • Caterpillar
  • Diesel Generator Sets 1501 - 2000
  • CM25E
  • General
  • Model: CM25, 4-stroke-engine
  • 255 mm (10.04 in)
  • 400 mm (15.75 in)
  • Emissions/Fuel Strategy: (WB) Cert stage 1 and 2
  • Turbocharged-aftercooled
  • Diesel oil / heavy fuel oil (HFO) / crude oil
  • Minimum Rating: 1940 kWe | Maximum Rating: 2910 kWe | Voltage: 3000 to 13800 Volts | Engine Rating Range: 2010 - 3015 kW
  • Frequency At Speed: 50 Hz @ 750 / 60 Hz @ 720
  • Ready To Accept Loads (Preheated/Vented): 40 s | Normal Ramp Up To 100% Load: 85 s | Emergency Ramp Up 10% To 100% Load: 30 s | Genset Efficiency Up To: 43.50% | Specific Fuel Oil Consumption (WB I) Up To: 187 g/kWh (0.412 Ib/kWh) | Specific Fuel Oil Consumption (WB II) Up To: 187 g/kWh (0.412 Ib/kWh) | Specific Lube Oil Consumption: 0.6 g/kWh (0.001 Ib/kWh)
  • Mean Effective Pressure Up To: 27.3 bar (396 psi)
  • Minimum: 7717 mm (304 in) | Maximum: 8713 mm (343 in)
  • Minimum: 2357 mm (93 in) | Maximum: 2357 mm (93 in)
  • Minimum: 3866 mm (152 in) | Maximum: 4066 mm (160 in)
  • Swept: 20.4 l/cyl (1247 in³)
  • Genset (minimum): 43 ton (US) (94799 lb) | Genset (maximum: 56 ton (US) (123459 lb)
  • Duty Cycle: Prime, Continuous | Configuration: 6,8,9 cylinder