2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

Information

2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

Producing reliable power from 985 to 1650 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM20C 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

OVER 1,600 DEALER LOCATIONS WORLDWIDE

Cat dealers in over 190 countries provide parts, service & warranty support to ensure maximum productivity

WORLD BANK (WB) EMISSION CERTIFICATION STAGE 1 AND 2POST-EMISSION TREATMENT SYSTEMS FOR LOWER EMISSION REQUIREMENTS AVAILABLE

Features may include:

  • Reliable Operation
  • Control & Monitoring
  • Ease Of Installation
  • Ease Of Operation
  • Intelligent Simplicity
  • Ease Of Maintenance
  • Fuel
  • Emissions
  • Expertise & Experience
  • World Wide Product Support

Photos

Highlights

  • Red Deer, Alberta
  • 2021
  • Caterpillar
  • Diesel Generator Sets 800 - 1250 CM20C
  • Diesel oil / heavy fuel oil (HFO) / crude oil
  • Available
  • Minimum: 1680 mm (66 in) | Maximum: 1816 mm (71 in)
  • Minimum: 2833 mm (112 in) | Maximum: 3010 mm (119 in)

Specifications

  • 2021
  • Caterpillar
  • Diesel Generator Sets 800 - 1250
  • CM20C
  • General
  • Model: CM20C, 4-stroke-engine
  • 200 mm (7.87 in)
  • 300 mm (11.81 in)
  • Emissions/Fuel Strategy: (WB) Stage 1 and 2
  • Turbocharged-aftercooled
  • Diesel oil / heavy fuel oil (HFO) / crude oil
  • Minimum Rating: 985 kWe | Maximum Rating: 1650 kWe | Voltage: 3000 to 13800 Volts | Engine Rating Range: 1020 - 1710 kW
  • Frequency At Speed: 50 Hz @ 1000 / 60 Hz @ 900
  • Ready To Accept Loads (Preheated/Vented): 40 s | Normal Ramp Up To 100% Load: 75 s | Emergency Ramp Up 10% To 100% Load: 25 s | Genset Efficiency Up To: 43.10% | Specific Fuel Oil Consumption (WB I) Up To: 189 g/kWh (0.417 Ib/kWh) | Specific Fuel Oil Consumption (WB II) Up To: 189 g/kWh (0.417 Ib/kWh) | Specific Lube Oil Consumption: 0.6 g/kWh (0.001 Ib/kWh)
  • Mean Effective Pressure Up To: 24.2 bar (351 psi)
  • Minimum: 6073 mm (239 in) | Maximum: 7125 mm (281 in)
  • Minimum: 1680 mm (66 in) | Maximum: 1816 mm (71 in)
  • Minimum: 2833 mm (112 in) | Maximum: 3010 mm (119 in)
  • Swept Volume: 9.4 l/cyl (575 in³)
  • Genset (minimum): 18.8 ton (US) (41447 lb) | Genset (maximum: 30 ton (US) (66139 lb)
  • Duty Cycle: Prime, Continuous | Configuration: 6,8,9 cylinder