2021 Caterpillar Auxiliary Engines C32 IMO III

Information

2021 Caterpillar Auxiliary Engines C32 IMO III

Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

Features may include:

Emissions
  • Utilizes SCR technology to enable IMO III emission regulations compliance while lowering operational costs
Control Strategy
  • Utilizes closed loop air assisted def dosing control strategy that delivers: highest efficiency mixing and control to lower operational costs; extends emissions useful life; ensures compliance; flexible to urea quality
Fuel System
  • Enhanced control of fuel injection optimized through crank timing and the a5 ecm technology
Power Reserve
  • Industry leading power reserve
Certifications
  • Wide range of available marine society certifications
Warranty
  • Industry-leading warranty coverage for factory packaged components
Service
  • Global dealer network for service in any location

Photos

Highlights

  • Red Deer, Alberta
  • 2021
  • Caterpillar
  • Auxiliary Engines C32 IMO III
  • Configuration: Vee 12, 4-stroke-cycle diesel
  • Diesel
  • Minimum: 3152 kg (6950 lb) | Maximum: 3248 kg (7160 lb)
  • Available
  • Minimum: 1451 mm (57.1 in) | Maximum: 1455 mm (57.3 in) | 6 Brick U-Flow: 1445 mm (56.9 in) | Dosing Cabinet: 477 mm (18.8 in) | 6 Brick Z-Flow: 1106 mm (43.5 in)
  • Minimum: 1507 mm (59.3 in) | Maximum: 1613 mm (63.5 in) | 6 Brick U-Flow: 597 mm (23.5 in) | 6 Brick Z-Flow: 597 mm (23.5 in) | Dosing Cabinet: 579 mm (22.8 in)

Specifications

  • 2021
  • Caterpillar
  • Auxiliary Engines
  • C32 IMO III
  • General
  • Configuration: Vee 12, 4-stroke-cycle diesel
  • Minimum Rating: 781 bkW (1047 BHP) | Maximum Rating: 994 bkW (1332 BHP)
  • 1500 rpm
  • 145 mm (5.71 in)
  • 162 mm (6.38 in)
  • 32.1 l (1959 in³)
  • 4-stroke
  • Heat exchanger or keel cooled
  • Turbocharged-aftercooled
  • IMO III emissions certified (SCR required)
  • Diesel
  • Electronic (A5 ECM)
  • Oil Change Interval: 750 hrs - deep pan
  • Minimum: 1507 mm (59.3 in) | Maximum: 1613 mm (63.5 in) | 6 Brick U-Flow: 597 mm (23.5 in) | 6 Brick Z-Flow: 597 mm (23.5 in) | Dosing Cabinet: 579 mm (22.8 in)
  • Minimum: 2130 mm (83.5 in) | Maximum: 2280 mm (89.9 in) | 6 Brick U-Flow: 2159 mm (85 in) | 6 Brick Z-Flow: 3751 mm (147.7 in) | Dosing Cabinet: 949 mm (37.4 in)
  • Minimum: 1451 mm (57.1 in) | Maximum: 1455 mm (57.3 in) | 6 Brick U-Flow: 1445 mm (56.9 in) | Dosing Cabinet: 477 mm (18.8 in) | 6 Brick Z-Flow: 1106 mm (43.5 in)
  • Refill: Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
  • 6 Brick Z-Flow: 565 kg (1246 lb) | Dosing Cabinet: 95 kg (209 lb) | 6 Brick U-Flow: 560 kg (1235 lb)
  • Minimum: 3152 kg (6950 lb) | Maximum: 3248 kg (7160 lb)
  • Engine Configuration: Vee 12 | Rotation: Counterclockwise from flywheel end | Flywheel Housing: SAE No. 0 with SAE No. 18 flywheel (136 teeth)