2021 Caterpillar Commercial Propulsion Engines C32 Tier 3 / Imo II

Information

2021 Caterpillar Commercial Propulsion Engines C32 Tier 3 / Imo II

Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)

Features may include:

Air Inlet System
  • Separate-circuit aftercooling – no sea water in aftercooler
Emissions
  • Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment
Control Strategy
  • Reliable electronic controlled unit injector fuel system
Fuel System
  • Enhanced control of fuel injection optimized through crank timing and the A4 ecm technology
Power Reserve
  • Industry leading power reserve
Certifications
  • Wide range of available marine society certifications
Warranty
  • Industry-leading warranty coverage for factory packaged components
Service
  • Global dealer network for service in any location

Photos

Highlights

  • Red Deer, Alberta
  • 2021
  • Caterpillar
  • Commercial Propulsion Engines C32 Tier 3 / Imo II
  • Configuration: Vee 12, 4-stroke-cycle diesel
  • Diesel
  • Minimum Engine: 3152 kg (6950 lb) | Maximum Engine: 3248 kg (7160 lb)
  • Available
  • Minimum: 1451 mm (57.1 in) | Maximum: 1455 mm (57.3 in)
  • Minimum: 1507 mm (59.3 in) | Maximum: 1613 mm (63.5 in)

Specifications

  • 2021
  • Caterpillar
  • Commercial Propulsion Engines
  • C32 Tier 3 / Imo II
  • General
  • Configuration: Vee 12, 4-stroke-cycle diesel
  • Range: 61-1450 bhp (46-1072 bkW)
  • 1600-2300 rpm
  • 145 mm (5.71 in)
  • 162 mm (6.38 in)
  • 32.1 l (1959 in³)
  • Heat exchanger or keel cooled
  • Turbocharged-aftercooled aspiration
  • U.S. EPA Tier 3 / IMO II emissions certified
  • Diesel
  • Electronic (A4 ECM)
  • Oil Change Interval: 1000 hrs
  • Minimum: 1507 mm (59.3 in) | Maximum: 1613 mm (63.5 in)
  • Minimum: 2130 mm (83.9 in) | Maximum: 2280 mm (89.8 in)
  • Minimum: 1451 mm (57.1 in) | Maximum: 1455 mm (57.3 in)
  • Refill: Lube Oil System w/Oil filter change: 146 L (38.5 gal)
  • Minimum Engine: 3152 kg (6950 lb) | Maximum Engine: 3248 kg (7160 lb)
  • Rotation from Flywheel End: Counterclockwise from flywheel end| Flywheel Housing: SAE No. 0 with SAE No. 18 flywheel (136 teeth)