Current Caterpillar Power-Systems Electric Diesel Generator Sets 800 - 1250 Diesel-Generator-Sets-800-1250

2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

Swipe to View More

  • Year 2021
  • Make Caterpillar
  • Model Diesel Generator Sets 800 - 1250
Shop Caterpillar Pre-Owned
Product Details Specifications Photos
2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

  • Year 2021
  • Manufacturer Caterpillar
  • Model Name Diesel Generator Sets 800 - 1250
  • Trim Name CM20C
  • Generic Type (Primary) General
  • Engine Type Model: CM20C, 4-stroke-engine
  • Bore 200 mm (7.87 in)
  • Stroke 300 mm (11.81 in)
  • Emissions Emissions/Fuel Strategy: (WB) Stage 1 and 2
  • Aspiration Turbocharged-aftercooled

2021 Caterpillar Diesel Generator Sets 800 - 1250 CM20C

Producing reliable power from 985 to 1650 kWe, each generator set has been designed to meet World bank (WB) emission certification stage 2. The CM20C 50 and 60 Hz, 6, 8 or 9 cylinder, turbocharged-aftercooled generator set, is designed for Ultrafast start time and load acceptance, low fuel and oil consumption requiring low maintenance.

OVER 1,600 DEALER LOCATIONS WORLDWIDE

Cat dealers in over 190 countries provide parts, service & warranty support to ensure maximum productivity

WORLD BANK (WB) EMISSION CERTIFICATION STAGE 1 AND 2POST-EMISSION TREATMENT SYSTEMS FOR LOWER EMISSION REQUIREMENTS AVAILABLE

Features may include:

  • Reliable Operation
  • Control & Monitoring
  • Ease Of Installation
  • Ease Of Operation
  • Intelligent Simplicity
  • Ease Of Maintenance
  • Fuel
  • Emissions
  • Expertise & Experience
  • World Wide Product Support

Engine

Engine Type Model: CM20C, 4-stroke-engine
Bore 200 mm (7.87 in)
Stroke 300 mm (11.81 in)
Emissions Emissions/Fuel Strategy: (WB) Stage 1 and 2
Aspiration Turbocharged-aftercooled

Fuel System

Fuel Type Diesel oil / heavy fuel oil (HFO) / crude oil

Electric

Electrical Minimum Rating: 985 kWe | Maximum Rating: 1650 kWe | Voltage: 3000 to 13800 Volts | Engine Rating Range: 1020 - 1710 kW

Operational

Operating Speed Frequency At Speed: 50 Hz @ 1000 / 60 Hz @ 900
Operating Conditions Ready To Accept Loads (Preheated/Vented): 40 s | Normal Ramp Up To 100% Load: 75 s | Emergency Ramp Up 10% To 100% Load: 25 s | Genset Efficiency Up To: 43.10% | Specific Fuel Oil Consumption (WB I) Up To: 189 g/kWh (0.417 Ib/kWh) | Specific Fuel Oil Consumption (WB II) Up To: 189 g/kWh (0.417 Ib/kWh) | Specific Lube Oil Consumption: 0.6 g/kWh (0.001 Ib/kWh)

Hydraulics

Maximum Pressure Mean Effective Pressure Up To: 24.2 bar (351 psi)

Dimensions

Length Minimum: 6073 mm (239 in) | Maximum: 7125 mm (281 in)
Width Minimum: 1680 mm (66 in) | Maximum: 1816 mm (71 in)
Height Minimum: 2833 mm (112 in) | Maximum: 3010 mm (119 in)

Capacities

Volume Swept Volume: 9.4 l/cyl (575 in³)

Weights

Weight Genset (minimum): 18.8 ton (US) (41447 lb) | Genset (maximum: 30 ton (US) (66139 lb)

Features

Features Duty Cycle: Prime, Continuous | Configuration: 6,8,9 cylinder

Product Photography