2021 Caterpillar Commercial Propulsion Engines C32 Tier 3 / Imo II
- Year 2021
- Make Caterpillar
- Model Commercial Propulsion Engines
- Engine Configuration: Vee 12, 4-stroke-cycle diesel
2021 Caterpillar Commercial Propulsion Engines C32 Tier 3 / Imo II
2021 Caterpillar Commercial Propulsion Engines C32 Tier 3 / Imo II
Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)
Features may include:
Air Inlet System- Separate-circuit aftercooling – no sea water in aftercooler
- Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment
- Reliable electronic controlled unit injector fuel system
- Enhanced control of fuel injection optimized through crank timing and the A4 ecm technology
- Industry leading power reserve
- Wide range of available marine society certifications
- Industry-leading warranty coverage for factory packaged components
- Global dealer network for service in any location
Engine
Engine
Configuration: Vee 12, 4-stroke-cycle diesel
Engine Power
Range: 61-1450 bhp (46-1072 bkW)
Rated Engine Speed
1600-2300 rpm
Bore
145 mm (5.71 in)
Stroke
162 mm (6.38 in)
Displacement
32.1 l (1959 in³)
Cooling
Heat exchanger or keel cooled
Aspiration
Turbocharged-aftercooled aspiration
Emissions
U.S. EPA Tier 3 / IMO II emissions certified
Fuel System
Fuel Type
Diesel
Drivetrain
Governor
Electronic (A4 ECM)
Operational
Operating Conditions
Oil Change Interval: 1000 hrs
Dimensions
Height
Minimum: 1507 mm (59.3 in) | Maximum: 1613 mm (63.5 in)
Length
Minimum: 2130 mm (83.9 in) | Maximum: 2280 mm (89.8 in)
Width
Minimum: 1451 mm (57.1 in) | Maximum: 1455 mm (57.3 in)
Capacities
Oil Capacity (w/filter)
Refill: Lube Oil System w/Oil filter change: 146 L (38.5 gal)
Weights
Dry Weight
Minimum Engine: 3152 kg (6950 lb) | Maximum Engine: 3248 kg (7160 lb)
Features
Features
Rotation from Flywheel End: Counterclockwise from flywheel end| Flywheel Housing: SAE No. 0 with SAE No. 18 flywheel (136 teeth)